llms.txt
Compare with other sites' llms.txt files →# Cadstrom
> Cadstrom is continuous AI validation for PCB design. Hardware engineers upload the schematic they are working on, at any stage from first draft to final release, and get back specific, evidence-backed findings fast. The analysis is a hybrid: AI reads the schematic and the component datasheets the way a senior engineer would, and deterministic circuit checks confirm what it finds. Your first design review is free.
Hardware teams often wait until a design is "ready for review" to look for problems, and by then the problems are expensive to fix. Cadstrom is built for the opposite habit: submit early, submit often, fix what it finds while it is still easy to fix, and check every revision again. Most teams find something they did not know about on the first pass.
## What Cadstrom checks
- Voltage compatibility between interfacing components, for example a driver's output levels against the receiver's input thresholds.
- Bus signal routing and orientation, including I2C, SPI and UART.
- Logic polarity, including active-high and active-low signals and open-drain configurations.
- Component ratings and margins against the conditions in the design.
- Component pin and signal assignments against the manufacturer's datasheet.
- Every finding comes with the evidence behind it, so the engineer can see why it was flagged and judge it.
How it works: AI reads the schematic and datasheets, and expert-system rules and simulation confirm what it finds. The findings are not split into separate AI and rule results; they are one set of findings, each with its evidence.
What it is not: Cadstrom is not a layout design rule check (DRC) and not signal integrity, power integrity or thermal simulation. It checks design intent, that parts are interfaced, specified and rated correctly, which is the class of error that schematic ERC and layout DRC do not catch. It runs upstream of formal stage-gate reviews and peer review and gives them a consistent first pass; it does not replace engineering judgment or sign-off.
## Who it is for
- Electrical and hardware engineers who want the tedious part of schematic review done for them, with full control of their design.
- Hardware engineering leads who want repeatable reviews across every design and every revision, without adding headcount.
- Product design firms and consultancies that review designs for their clients.
- Proven on medical, industrial, and consumer designs.
## Supported design tools
- Works with Altium, Cadence, Siemens, KiCad.
- Upload your native schematic project files. The design does not need to be complete; partially specified designs can be checked.
## Security
- Enterprise-grade sign-in and access control.
- SOC 2 compliant, externally audited, with continuous control monitoring.
- Your design is encrypted at rest and in transit, never used to train models, and deleted on request.
- All validation runs inside a secure cloud environment.
- [Security page](https://www.cadstrom.io/security): how Cadstrom protects design files.
- [Trust Center](https://compliance.cadstrom.io): SOC 2 report, monitored controls and subprocessor list, available on request with a business email.
- Security questions: security@cadstrom.io
## Getting started
- Your first design review is free. Keep iterating on that design free for your first month.
- [Get started](https://www.cadstrom.io/start): create a secure account and upload the design you are working on now.
- For a second design, a team rollout or anything else, talk to us through the Contact page.
## Demo
- [Demo](https://www.cadstrom.io/demo): a short walkthrough of a schematic checked from upload to findings.
- [YouTube channel](https://www.youtube.com/channel/UC3X6XdUxi6WhL5C2MKN5Hjg): demo and product videos.
## Contact
- [Contact](https://www.cadstrom.io/contact): schedule a video call with a Cadstrom engineer, or email the team.
- General: info@cadstrom.io
- Careers: careers@cadstrom.io
## Resources
- [Resources](https://www.cadstrom.io/resources): articles for hardware teams on schematic review and validation.
- [Datasheet forensics: reading between the lines for PCB validation](https://www.cadstrom.io/resources/datasheet-forensics-reading-between-the-lines-for-pcb-validation): how footnotes, conditions and hidden parameters in datasheets lead to design errors.
- [Reviewing the review: a self-evaluation framework for hardware design reviews](https://www.cadstrom.io/resources/reviewing-the-review-a-self-evaluation-framework-for-hardware-design-review): six dimensions for judging your own review process.
- [The simulation scalability problem](https://www.cadstrom.io/resources/the-simulation-scalability-problem-why-behavioral-verification-falls-short): why behavioral simulation leaves most circuits unverified in real workflows.
- [The future of hardware validation: closing the gap](https://www.cadstrom.io/resources/the-future-of-hardware-validation-closing-the-gap): how automation and systematic verification keep up with design complexity.
- [The hidden cost of PCB respins](https://www.cadstrom.io/resources/the-hidden-cost-of-pcb-respins-why-90-of-first-prototypes-fail): why schematic-level errors slip past DRC and reach the prototype.
- [The true price of PCB reworks](https://www.cadstrom.io/resources/the-true-price-of-pcb-reworks): the debug time and schedule impact behind a board rework.
## Company
- Cadstrom builds automated validation for electronics design. Made in Canada, with a distributed team.
- [Careers](https://www.cadstrom.io/careers)
- [LinkedIn](https://www.linkedin.com/company/cadstromio/)